Sök
Stäng
UNIVERSAL COMMUNICATION MODULEGSM-X
GSM-X is a multi-purpose communication module that offers extensive functionality and support for multiple communication paths.
It can easily find numerous applications, some of which can be implemented in parallel.
The module can be used in many existing and newly built installations. GSM-X can receive event information from the connected alarm control panel or the controller and forward it to monitoring stations of security agencies or interested persons via cellular network, Ethernet* or analog PSTN** telephone line.
The module can be used to implement remote control functions, such as arming the system or opening the gate, also using the mobile application.
GSM-X can give a "new life" to some older alarm systems.
* When GSM-X is used with GSM-X-ETH
** When GSM-X is used with GSM-X-PSTN
GSM-X can interact with the INTEGRA and INTEGRA Plus control panels via the RS-232 interface. It can report events from these control panels through all available paths: audio (via cellular network or PSTN*), SMS, Ethernet** and GPRS. For INTEGRA Plus, a function of automatic creation of SMS notifications is also available, the message content being based directly on the event list.
Additionally, GSM-X allows remote connection to the INTEGRA and INTEGRA Plus programs:
* When GSM-X is used with GSM-X-PSTN
** When GSM-X is used with GSM-X-ETH
The device comes with a GSM telephone. It has two SIM card slots and allows you to use services provided by different operators. In case of failure to connect to one of the operator's network, the module will automatically switch to the other card to maintain continuous communication. A very useful feature is the prepaid SIM card handling functions that allow you to check your account balance and set notifications in case it has dropped below the required minimum.
An undisputable advantage of the device is that it allows simple expansion by adding one of the modules: GSM-X-ETH (Ethernet) or GSM-X-PSTN (telephone). It provides access to additional communication channels – Ethernet network or analog telephone line.
* When GSM-X is used with GSM-X-PSTN
** When GSM-X is used with GSM-X-ETH
As regards reporting, information can be effectively transmitted using:
Where events are made available using GPRS technology or via Ethernet**, the module supports two transmission formats:
Support for several transmission paths in one device guarantees fast and reliable transfer of information. You can use each of them independently, defining specific tasks to be carried out.
GSM-X with the GSM-X-ETH module connected makes possible reporting through two independent paths: Ethernet and GPRS (with priority setting option).
The device is constantly monitoring the status of connections with the monitoring station and, when necessary, it replaces one channel with the other.
When it is the GSM-X-PSTN module that works with GSM-X, the dual path reporting is performed through cellular network and analog telephone line.
GSM-X offers the possibility of reporting to two autonomous monitoring stations. If necessary, each of them may be assigned two IP addresses (TCP/UDP reporting) or two telephone numbers (audio reporting).
The GSM-X module makes it possible to send notifications to up to 8 telephone numbers. This function can be implemented by using:
The device can transmit notifications to the recipient through several independent paths. The event alert will be sent via all of the preprogrammed channels, therefore the information will reach the recipient even when one of them turns out to be unavailable.
The module can fully replace the analog line. In that case, it generates voltage states and line status signals (e.g. on-hook/off-hook) typical of the line and, after connection via GSM network is set up, it transmits signals coming from the analog line. When the line is unavailable, it diverts the voice calls to the GSM network. In the case of private branch exchanges (PBX), it functions as an additional external line, which allows you to optimize the cost of calls (from PSTN to GSM). The module can also filter calls, generate a ringing tone and caller ID information.
GSM-X has 4 outputs that can be remotely controlled and activated in several ways.
In addition to controlling the alarm system, the GSM-X module will be a perfect choice to implement automation functions, including control of lighting, gates, wickets, roller shutters/blinds, solenoid valves, etc. If needed, it will turn on heating, air conditioning, smoke extraction, watering and many other systems.
The application GX CONTROL allows:
PUSH messages give the user permanent access to information.
Importantly, configuration of the application is very simple, and so is connection with the module. All you have to do is send an SMS from the application level to the device and receive the configuration data in response. Another, equally convenient way is to scan the QR code that is generated in the GX Soft program or in a preconfigured application.
GX Soft is an advanced tool provided with a friendly and clear interface, intended for configuration as well as diagnostics of SATEL communication modules.
The module and the program interact locally (via USB) or remotely (via Ethernet* or GPRS).
*When GSM-X is used with GSM-X-ETH
Thanks to the SATEL connection set-up service, you can enjoy many functionalities of GX CONTROL and GX Soft. Configuration of communication between the application / program and the GSM-X module takes just a few moments, without any need to use external IP address or advanced network settings. When being sent, the data are encrypted using a sophisticated algorithm to ensure security of the transmission.
GSM-X is compatible with the UpServ program, which enables the device to be remotely updated. This allows the installer to quickly add new functionalities without having to physically visit the premises and dismount the module.
* When GSM-X is used with GSM-X-ETH
