UNIVERSAL MONITORING MODULE GPRS-A
GPRS-A is a universal monitoring module, provided with GSM telephone, supporting data transmission using GPRS technology.
The device can work as part of intruder alarm systems as well as automation systems.It provides reporting from the alarm control panel to the monitoring station and notifies the concerned parties about selected events.Thanks to its configurable inputs that support analog signals, it can be used to supervise operation of any sensors measuring different physical quantities and report instances when the set thresholds are crossed.For the module to interact with prepaid SIM cards, it has been provided with functions required to check the account balance and configure notifications of the balance falling below the minimum amount.
The module can be successfully used in many existing and newly built systems. GPRS-A can receive information about events from the connected control panel and forward them to the monitoring stations at security agencies or to the parties concerned via the GSM network. The module connects to the control panel through the control panel dialer (the module simulates the monitoring station) or through appropriately configured control panel outputs connected to the module inputs.
The module can be used to implement remote control functions, such as arming the system or opening the gate, also using the mobile application. The state of module outputs can also be changed automatically in response to specific events.
GPRS-A can give a "new life" to some older alarm systems. It can also work as a stand-alone device, monitoring the state of various devices, automation systems, etc.
As regards reporting, information can be transmitted via:
Where events are sent using GPRS technology, the module supports two transmission formats:
The GPRS-A module makes it possible to send notifications to up to 8 telephone numbers. This function can be implemented by using:
The device can send notifications to the recipient through several independent paths. Since the event alert will be transmitted via all of the preprogrammed channels, the information will reach the recipient even when one of them turns out to be unavailable.
GPRS-A has 4 outputs, including 2 relay and 2 OC type. They can be remotely controlled and activated in several ways from any location:
GPRS-A can find use in yachts, caravans, cottages, etc. When used in conjunction with a number of detectors, it will reliably protect the interior of the given premises. The module can, for example, send a notification to inform the owner or selected parties that the door is open or an attempt was made to start the engine.
As it can work e.g. with temperature and humidity sensors, the module will be a perfect choice for monitoring environmental conditions during storage of food, medicines, etc. by:
Collecting information from many modules in one place makes it possible to supervise, for example, a wind farm.
The application allows configuration:
PUSH messages give the user permanent access to information.
Importantly, configuration of the application is very simple, and so is connection with the module. All you have to do is send an SMS from the application level to the device and receive the configuration data in response. Another, equally convenient way is to scan the QR code that is generated in the GX Soft program or in a preconfigured application.
GX Soft is an advanced tool with a friendly and clear interface, intended for configuration as well as diagnostics of SATEL communication modules. The module and the program can interact locally
(via RS-232 (TTL)) or remotely (via GPRS).
Easy and secure connection
Thanks to the SATEL connection set-up service, you can enjoy many functionalities of GX CONTROL and GX Soft. Configuration of communication between the application / program and the GPRS-A module takes just a few moments, without any need to use external IP address or advanced network settings. When being sent, the data are encrypted using a sophisticated algorithm to ensure security of the transmission.
Remote software update
GPRS-A is compatible with the UpServ program, which enables the device to be remotely updated. This allows the installer to quickly add new functionalities without having to physically visit the premises and dismount the module.
Universal monitoring module